Men's suit stitching: what to know before you order a pant coat

A ready-made suit is cut for an average body that nobody actually has. That is the whole point of men's suit stitching: the coat is built around your shoulders, your arms and your posture. Done well, it is the best fitting thing you own. Done badly, it is an expensive mistake.
Here is how to get it right.
Two-piece or three-piece
- Two-piece: coat and trousers. Right for offices, interviews and most events.
- Three-piece: adds a waistcoat. Popular for weddings and winter functions.
If the suit is for a wedding, ask whether you might later wear the waistcoat over a shalwar kameez. If so, choose its cut and colour with that in mind.
Fabric decides half the result
A suit needs cloth with enough weight to hang well. Very thin cloth shows every seam and wrinkles by lunchtime.
- Wool blends hang best and suit winter and evening events.
- Tropical or summer blends are lighter for Lahore's heat.
- Polyester-heavy cloth is cheaper and resists wrinkles, but is warmer to wear.
Ask your tailor how many metres to buy before you go to the cloth shop. It changes with your size, the cloth width and whether there is a waistcoat.
The details to decide
- Buttons: two-button is the standard. Three-button is more traditional.
- Lapel: notch for everyday, peak for a more formal look.
- Vents: one at the centre back, or two at the sides. Two sit better when you put your hands in your pockets.
- Lining: full lining lasts longer; half lining is cooler.
- Trousers: with or without pleats, and how narrow at the ankle.
The shoulder is the test
Almost everything on a coat can be altered later, except the shoulder. When you try it on:
- the shoulder seam should end where your shoulder ends
- there should be no dent or bump below the seam
- the collar should sit flat against your shirt collar, with no gap at the back of the neck
If the shoulder is wrong, say so at the fitting. Do not wait for the final delivery.
Always ask for a fitting visit
A good suit tailor will ask you to come once when the coat is half made. This first fitting is where the sleeve length, the waist and the trouser length are corrected. A tailor who says a fitting is not needed is either very sure or cutting corners. For your first order with a new tailor, insist on it.
Checking the finished suit
- Sleeve shows about a finger-width of shirt cuff
- Coat covers your seat and does not pull at the button
- Trousers touch the shoe with one small fold, not a pile of cloth
- Pattern or stripes line up at the pockets and the back seam
- Buttons are sewn firmly and the buttonholes are clean
Allow enough time
A suit takes longer than a shalwar kameez. Before wedding season, good tailors are booked for weeks. Order early and you get the tailor's attention instead of his rush.
Finding a suit tailor
Not every tailor who stitches shalwar kameez also makes coats. When you search for a men's tailor near me, look for one who lists pant coat or suits as a service and can show you a finished coat.
On Darzi Waly each tailor lists the garments he makes with his own price for each, along with photos and customer reviews, so you can find one who really does suits. For everyday wear, see our shalwar kameez stitching guide.


